Tandberg TPT 3031 A Owners Manual

Page 2

READ THIS FlRST!

For your safety!

To prevent electrical shock or fire, do not expose
electronic products to rain or moisture, and do
not remove covers (or back). if anything fails,
leave the repair to a qualified technician.

Pullout the power plug during thunder storms
and when you are away for a long time (e.g.
holidays, etc.).

Warning!

Faults on the units caused by the circumstances
described in the warnings below, do not he
cessarily apply for warranty service.

Main power

In some areas the main power wall outlet carries
high frequency data and intercom communi-
cations. To prevent this high frequency to reach
the tuner, an HF filter should be connected

in the power line. Ask your local Tandberg
dealer if this high frequency is in your area.
Should this high frequency reach the tuner,

and interfere with the electronics, damage may
occur in the outputstage or the speakers.

Connecting

When connecting the units in a Hl-Fl system
together, it is very easy to touch the hot wire on
the phone lead and generate a hum signal. This
signal can be amplified and cause damage to

the control/power amplifier or the speakers.

To avoid this problem, switch off all the units

in the system before connecting.

Contents

Page
Power requirements .................................. 3
Connecting to control amplifier ........................ 3
Switching on ....................................... 4
Tuning display ...................................... 4
Search functions .................................... 5
Presets ............................................ 5
Mono - Mute ...................................... 6
Remote control ..................................... 7
Accessories (extras) .................................. 9

Technical Data ...........

.......................... 10