Sony rm d 3 k service manual

Page 1

RM-D3K

SERVICE MANUAL us Model

Canadian Model
AEP Model
UK Model

RMT-D3 RMR»D3

SPECIFICATIONS MODEL IDENTIFICATION

-Specification Label-
System infrared pulse method
Power requirements 120V AC, 60H: the USA and Canada models)
240V AC, 50Hz the UK model)
Effigy 33:151in ("'5 nmena' Emma" SONYE MODEL no RMR-D3
RMT~DS: DC 3V, 2 size AA (H6) batteries
rower consumption gzw IRMRl-Dia) ( REMOTE CONTROL/TIMER/DIGITAL IlO ADAPTOR
nputs igitalcoaxa connector phone-jack) v
Digital optical connector (optical jack) Wm
Outputs Digital coaxial connector (phone-jack)
75 ohms. 0.5vap. 120%
Digital optical connector (optical jack)
wavelength: 680nm. -18dBm
Weight RMR-DS: approx 360 g (13 oz)
RMT-D approx. 110 (4 oz) including batteries
Dimensions RMRADa: approx. 83 35 X 117 mm (wlhld)
(3 I. X 1 yrs x 4 5/: inches )
including projecting parts

RTE/03: approx 51 x 18 x 175 mm (wlh/d) US/canadian model: AC 120V 60Hz 22W

2 x x 7 inches . _ ~

inclgding growing parts AEP model . AC 220 230v 5on 22w
Supplied accessories AA (R6) batteries (2) UK model : AC 240V~50Hz 2.2W

Accessorles not supplied

Digital connectin cord (phonern plugs)
VMC-18 (12m VMC 2S(2rn

Digital cable for optical transmission (optical plug)
POO-5 (0.5m), Poo-1o (1m), Poo-15 (l.5m)

'Your dealer may not handle the above listed accessories Please ask the
dealer tor detailed inlorrnation.

Design and specifications subject to change without notice
Note

This appliance conforms with EEC Directive 87/308lEEC regarding
Interterence suppression

SYSTEM ADAPTOR KIT
ONY;

Page 2

RM-D3K

10

SECTION 1

GENERAL

Location and Functio of Controls

(Front)
Fteler to the pages indicated in O tor details

Remote sensor

INPUT SELECT selector
® 6 ®

Selects the input signal ot the
TOD-03 (either digital or analog).

TIMER selector ®

POWER switch and Indicator
To operate the TCD~D3 by remote
control, turn to either STANDBY or
ON. To use the input/output
connectors or to make timer-
activated recording or playback. turn

to ON.

Location and Function of Controls

1 Remote Commander 'nMT-Da

STAFIT ID AUTOI COUNTER

WFIITE/ MODE/RESET

ERASEI and other

RENUMBER - operation

buttons 0 buttons

(tor writing or (have the same

erasing a start ID I function as the TCD-

and renumbering é. é: no buttons High.

program numbers) é speed cue/review

N during playback
umerlo -

buttons/CLEAR] m Emanfinflof

MUSIC SCAN . E be made )

buttons 0 O --' 3'

(tor direct selecting) I: I: d: o bunon ®

II I m I m it a J (tor record-muting)

buttons 0 0 ' '

(tor remotevconlrol

operation of Sony

CD players)

CD SVNCHRO

STOP/START]

STANDBY

buttons 0

(tor synchronized

recording

with SONV CD

players)

This section is extracted from
instruction manual.

(Rear)

DIGITAL INPUT selector
0 0 0

COAXIAL INPUT @
(coaxial digital Input)
connector

COAXIAL OUTPUT

(coaxial digital output)
connector a

Power supply cord

Optical input/output
connectors ®

OPTICAL OUTPUT
(optical digital output)
connector

OPTICAL INPUT
(optical digital input)
connector

Special connector

It Whichever position is selected on
the DIGITAL iNPUT selector. the
signal is output simultaneously
lrom the OPTICAL OUTPUT and
COAXIAL OUTPUT connectors.

Remote Control Operations

You can operate the TCD»D$ by remote control when the RMRDS
is connected to the tape-cordon

AC power adaptor
(supplied with the TOD-03)

@Turn the TCD-DSs
power switch to on

@To the REMOTE
DIGITAL I/O connector

Power source of the TCD-D3
Use the supplied AC power adaptor especially when making timer-
activated recording or playback.

HOLD switch of the TCD-03
You can control the TOD-DB with the remote commander even
when the HOLD switch at the TOD-DB is on.

Note

To avoid causing noise or other mallunclloning. be sure to tum all the power
at both the RMFi-DG and the T0003 belore you connect or disconnect the
unit lrom the REMOTE DIGITAL IIO connector at the TOD-03,

11