Sony lbt xb 66 k owners manual

Page 2

,A To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.
Refer serVicing to qualified personnel only.

1 Do not install the appliance in a confined space,
i such as a bookcase or built-in cabinet.

Laser component in this product IS capable of
omitting radiation exceeding the limit (or Class 1.

This appliance is classified as
a CLASS 1 LASER product
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.

This caution label is located inside the unit.

DAUTIDN .m u.- mm. m. oecu in)
giving»: mum 5m rm to a...
AWW i-mn mam-a up A.» u-
m... m

NOTICE FOR THE CUSTOMERS IN THE
U.S.A.

memmmmm
mmmm-ioufl
mmmiwsm

a». salon ram-an um um

This symbol is intended to alert the
user to the presence of uninsulated
dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance (seryicing)
instructions in the literature '
accompanying the appliance.

CAUTION

the use of optical instruments with this product WIII
increase eye hazard,

INFORMATION

This equipment has been tested and Iound to

comply with the limits for a Class E digital devrce,

pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, it not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular

Installation. 11' this equipment does cause harmful

interference to radio or teleVision reception. which

can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the followmg
measures.

, Reorient or relocate the receiving antenna.

7 Increase the separation between the equipment
and receiver.

- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected,

- Consult the dealer or an experienced radio/ TV
technician for help.

CAUTION

You are cautioned that any changes or modifications
nol expressly approved in this manual could void
your authority to operate this equipment.

Note on CATV system installer:

This reminder is provided to call CATV system
installers attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.

NOTICE FOR THE CUSTOMERS IN
CANADA

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

This stereo system is equipped with the Dolby' B-
type noise reduction system.

Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol in are
trademarks of the Dolby Laboratories Licensing
Corporation.

@

(LBT-XBSO/ XB60 only)