Sony hcd ex 600 hcd ex 700 hcd ex 900
This is the 72 pages manual for sony hcd ex 600 hcd ex 700 hcd ex 900.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.
Extracted text from sony hcd ex 600 hcd ex 700 hcd ex 900 (Ocr-read)
Page 1
I-CDEXHUEXID'
:lut
Ver. 1.0 2011.04
HCD-EX600 is the amplifier, USB, CD player
and tuner section in MHC-EXSOO.
HCD-EX700 is the amplifier, USB, CD player
and tuner section in MHC-EX700.
HCD-EX900 is the amplifier, USB, CD player
and tuner section in MHC-EXQOO. Photo: HCD-EXQOO
AEP Model
HCD-EX600/EX700
Russian Model
HCD-EX600/EX900
MPEG Layer] audio coiling rochnulopy and patents hcouscd mun
Fruuuhofcr 115 and Thomson.
Model Name Using Similar Mechanism New
WIIIdOsz Media Is cuhcr LI rcgixlcrcd lrddcnurk or Imdcmnrk of Microsofl - - _
Corporation In the United Smros aud/ororhcr countries, CD seem Mechanism Type CDM7GB D1BD76
. TIm product Conldlm technology sulucciroccnamnucllcctual property Optical Pick-up Block Name DA11MMVGP
rights of Microsoft. Use or distribution of Ilm technology outside of this
product is prohibited million the appropriate liconsclsl from Microsoft
SPECIFICATIONS
AmpliIier section Inputs CD player section
The following measured at AC 230 v, DVD/PC IN UR (phono jacks): System:
50/60 Hz Sensitivity 700 my impedance Compact disc and digital audio
22 m system
HCD-EXQOO Laser Diode Properties
From Speaker: Outputs Emission Duration: Continuous
Power outpur (rated): PHONES (srereo mini jack): Laser Output": Less than 44.6uW
80 w + 80 w (at 3 f2. 1 kHz. 1% THD) aceeprs headphones with an *Thls output is rhe value
RMS output power (reference): impedance of x Q or more measurement at a distance of
135 w + 135 w (per channel at 3 Q. SPEAKERS: impedance 200mm from the objective lens
1 kHz) HCDVEX900: impedance 3 0 surface on Ille Optical Pickrup
Suhwoofer: HCDrExnn/Exooo: impedance 4 (1 Block wirh 7nuu aperture.
RMS output power (reference): SUBWOOFER (HCDVEX900 only): Frequency respon. 30 Hz , 20 kHz
200 W (at 8 Q. 100 Hz) impedance 8 Q Signalrtoenmsc ratio More than 90 dB
Dynamic range: More [han 88 dB
HCD-EX700 USB section
Power output (rated): Supported bit rate: Tuner section
120 w + 120 w (ar 4 n. 1 kHz. 1% THD) MP3 (MPEG 1 Audio Layers): FM stereo. FM/AM superheterodyne tuner
RMS output power (reference): 32 khps , 321) kbps, VBR Antenna:
200 w + 200 w (per channel at 4 Q. WMA: 48 kbps , 192 kbps FM lead antenna
1 kHz) AAC: 42 kbps , 320 kbps AM loop antenna
Sampling frequencies:
HCD-EXGOO MP3 (MPEG 1 Audio Layers): FM tuner section:
Power output (rated): 32/44J/48 kHz Tuning range:
50 w + 50 W(a14 (l, 1 kHz. 1% WMA: 44.1 kHz 87.5 MHz - 108.0 MHz (50 kHz step)
Tl-lD) AAC: 44.1 kHz Intermediate frequency:
RMS output power (reference): 4. (USB) port: 200/250/300/350/400 kHz
90 w + 90 W (per channel ar 4 (1, Maximum current:
5 .
1 kHz) 00 '"A - Continued on next page -
9-893-184-01
20110044 Sony Corporation
© 2011.04 Published by Sony Techno Create Corporation
Page 2
HCD-EX600/EX700/EX900
AM tuner section:
Tuning range
Russian model:
531 kHz » L602 kHz (9 kHz step)
Other models
531 kHz - L602 kHz (9 kHz step)
530 kHz - L610 kHz (10 kHz step)
Intermediate frequency: 400 kHz
General
Power requirements
Russian model:
AC 220 v - 240 v, 50/60 Hz
Other models:
AC 120 v - 240 v, 50/60 Hz
Power consumption
HCDeEX900: 85 w
(0.5 w at rhe Power Saving Mode)
HCDVEX700: 70 w
(0.5 w at rhe Power Saving Mode)
HCDeEXquO: 45 w
(0.5 w at the Power Saving Mode)
Dimensions (W/H/D) (excl. speakers)
Approx. 210 mm x 312 mm x
375 mm
Mass (excl. speakers)
HCDVEX900/EX700: Approx, 3.8 kg
HCDeEXSOO: Approx. 3.5 kg
Design and specifications are subject to
change wrthour nonce,
NOTES ON CHIP COMPONENT REPLACEMENT
- Never reuse a disconnected chip componentr
- Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
- Keep the temperature of soldering iron around 270
' Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
- Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance oi procedures
other than those specified herein may result in hazardous radia-
tion exposure.
This appliance is classified as
3 CLASS 1 LASER product.
KLASSI LASERAPPARAT This marking is located on the
rear exterior.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAiTE
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK A OR DOTTED LINE
WITH MARK A ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.