Sony hcd dr 3 dr 330 xb200

Page 1

HCD-DR3/DR330/XBZOO

SERVICE MANUAL

AEP Model
UK Model

HCD-XBZOO

E Model

HCD-DRS/DH330

Australian Model

HCD-DFI3
HCD-DR3/DR330/XBZOO is the tuner, deck,
CD and amplifier section in LBT-DR3/
DFl330/XBZOO.
Manufactured underlicense from Dolby Laboratories CD Model Name Using Similar Mechanism HOD-@2500
Licensing Corporation. B U 'tT KSM 213ECM/C2NP
DOLBY and the double-D symbol [1!] are trademarks SECTION ase "' ype '
of Dolby Laboratories Licensing Corporation. Optical Pick-UP Type KSS-213E/02N
3232 Model Name Using Similar Mechanism NEW
SECTION Tape Transport Mechanism Type CWL-44-RR
SPECIFICATIONS

Amplifier section MD/VIDEO IN (phono jacks): Wavelength 780 , 790 nm

(LBTVXB200)
DIN power output (Rated) 70w + 70w
(6 a at 1 kHz DIN)

Continuous RMS power output (Reference)

80W + 30w
(5 n at 1 kHz, 10%
mm

Music power output (Reference)
140w + 140w
(o n at l kl-Iz, 10%
THD)

(LBTVDR330/DR3)
The following measured at AC 1 10/220v 60Hz :
Continuous RMS power output (Reference)

85W + xsw

(o a at 1 kHz, 10%
mm

70w + 70w

(5 n at 1 kHz, DIN)

DIN power output (Rated)

The following measured at AC 120/240v 60Hz :
Continuous RMS power output (Reference)

100w + 100w

(o Q at l kl-Iz, 10%
Tl-ID)

80W + x0w

(o a at 1 kHz. DIN)

DIN power output (Rated)

Inputs
PHONO IN (phono jack):
sensitivity 3mV.
impedance 47 m

MICROFILM

sensitivity 250mV.
impedance 47 kt)
Outputs
PHONOS (stereo phono Jacks):
accepts headphones of 8 n
or tnore
MD/VIDEO OUT (phone jack):
voltage 250mv.
impedance 1 he
accepts impedance of o to
lo 9

SPEAKER:

CD player section
System Compact disc and digital
audio system

Laser Semiconductor laser

(A = 780 ntn)

Entis on

duration: continuous

Max. 44.6pw*

*This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pockeup Block with 7 nlin
aperture.

Laser output

ZOHZ r ZOkI-TZ ($0.5 dB)
More than 90 dB
More than 90 dB

Frequency response
Signaletoenoise retio
Dynamic range

DIGITAL OUT

(Square opttcul connector Jacki rear panel)
Wavelength 500 nttt
Output Level 718 dBm

Tape deck section

Recording system Aetrack Zechannel stereo

Frequency response (DOLBY NR OFF)
60 713.000 Hz (:3 on).
using a Sony TYPE I
CZISSEIle

Tuner section
FM stereo, FM/AM superheterodyne tttner

FM tunr section
Tuning range 87.5 , 108.0 MHz

(50 kHz step)

Continued on next page

COM PACT Hi-Fi STEREO SYSTEM

SONY.)

Page 2

r

AM tuner section
Tuning renge
European and Middle Eastern models:
53171.602 kHz
(With the tuning interval set at 9 kHz)
53] r 1.602 kHz
(With the tuning interval set at 9 kHz)
530 71.710 kHz
(With the tuning interval set at 10 kHz}
AM loop antenna,
External antenna terminals
450 kHz

Other models:

Antenna
Intermediate frequency

General

Power requirements
European model:
Mexican model:
Australian model:
Other models:

230 v Ac. 50/50 1-12
120v AC. 50/60 Hz
220 7 240 v AC. 50/60 1-12
1 10 7 120 v or 220 7 240 V AC, 50/60 Hz Adjustable
with voltage selector
Power consumption
(HCD7DR330/DR3 1 180W
(l-ICDVXBZOO) 135w
Dimensions(w/li/d) Approx. 355 X 425 X 442 mm

(14 X I6l4 X 171/; in) incl

projecting pans and controls
Mass Approx 13 1 kg (21; lb 14 oz.)
Supplied accessories AM loop anrenna (11
Remote RM7SG7B 11)
FM Wire antenna 11)

Design and specifications are subject to change Without notice

CAUTION

Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.

Notes on chip component replacement

' Never reuse a disconnected chip Component.

Notice that the minus side of a tantalum capacitor may be
damaged by heat.

Flexible Circuit Board Repairing

Keep the temperature of soldering iron around 270°C
during repairing.

- Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).

Be careful not to apply force on the conductor when soldering
or unsoldering.

Laser component in this product is capable
of emitting radiation exceeding the limit for
Class 1.

CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPAFIAT

This appliance is classified as a CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT MARKING is located on the rear
exterior.

The following caution label is located inside the unit.

L2

MODEL IDENTIFICATION

Parts No.

PARTS No. MODEL
47222el40AOEI XB200 :AEP, UK
47222714170EI XB200 : EE, CIS
472227142A0EI DR3 : E, SP, AR
47222-1434: DR3 : AUS
47222el44~0EI DR3 : MX
47222el45AOEI DR330

- Abbreviation
SP : Singapore model
MX : Mexican model
AR : Argentina model
AUS : Australian model
EE : East European model

SAFETY-RELATED COMPONENT WARNINGI!

COMPONENTS IDENTIFIED BY MARK AOR DO'I'I'ED LINEWITH
MARK A ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.