Sanyo DC MP9500 Owners Manual

Page 1

Page 2

-1- CAUTIONR SK OF ELECTRIC SHOCKDO NOT OPEN AVIS: R SQUE DE CHOC ÉLECTRIQUE NE PAS OVRIR CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CAUTION THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE. TO ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PROD- UCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. - The apparatus shall not be exposed to dripping or splashing. - Do not use where there are extremes of temperature (below 5 oC or exceeding 35 oC), or where direct sunlight may strike it. - Because of the CD players extremely low noise and wide dynamic range, there might be a tendency to set the volume on the amplifier unnecessarily high. Doing so may produce an excessively large out- put from the amplifier which could damage your speakers. - Sudden changes in the ambient temperature may cause condensa- tion to form on the optical lens inside the unit. If this happens, take \ out the disc, leave the unit for about 1 hour, and then proceed to operate. - The systems speakers use powerful magnets. Do not place time- pieces, credit cards, cassette tapes or video tapes, etc. near the speak\ - ers. - Do not install this equipment in a confined space, such as a book case or built in cabinet. - No object filled with liquids, such as vase, shall be placed on the ap- paratus. - The rating label is located on the bottom of the unit. IMPORTANT If the plug supplied with this equipment is not suitable for the socket outlets in your home it should be cut off and replaced with the correct type. Disposal of Plug If the non rewireable plug is to be cut off, the removed plug should be disposed of carefully as there is a shock hazard should the plug be inserted into a live socket. Replacing Fuse The detachable fuse cover must be replaced after changing the fuse. Only a 3A fuse should be used and should comply with BS1362 and should carry the ASTA mark . The unit is not disconnected from the mains unless it is unplugged from \ the AC outlet. The wires in the mains lead are coloured in accordance with the follow- ing code: Blue Neutral Brown Live The wires in the mains lead must be connected to the terminals in the plug as follows: Wire colour Plug terminal marking Blue N or Black or Blue Brown L or Red or Brown Do not connect either wire to the earth terminal. If the mains plug contains a fuse this should be 3A, if a plug without a\ fuse is used the distribution board fuse should not be greater than 5A. PRECAUTIONS