Sanyo CDP M303 Owners Manual
This is the 12 pages manual for Sanyo CDP M303 Owners Manual.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.
Extracted text from Sanyo CDP M303 Owners Manual (Ocr-read)
Page 1
02 01 CAUTIONS FOR SAFETY Do not take the unit apart. The laser beam used in the unit could harm your eyes. Do not insert pins or other objects inside the unit. This unit is equipped with a safety device which automatically turns the laser beam off when the disc compartment is opened. If a pin or other metal object should get inside the unit, however, this safety device may be deactivated. Do not drop the unit or subject it to strong shocks. Doing so could result in damage. SAFETY TIPS Do not place the unit in the following locations: Locations where the temperature is high. The cabinet may warp or the unit may otherwise be damaged if it is placed in direct sunlight, near heaters (where the temperature is 140 F/60 C or greater) or in cars with the windows closed. (In the summer, the temperature may get as high as 212 F/110 C or more.) Use the unit within a temperature range of 41 F/5 C to 95 F/35 C.In humid or dusty locations. In locations exposed to heavy vibrations. On unstable or tilted surfaces. CONDENSATION If cold water is poured into a glass, water droplets form on the outside of the glass. This is called condensation. Condensation may occur on internal operating parts of the laser pickup. CONDENSATION OCCURS: When the unit is brought from the outdoors into a warm room, or if it is in a cold room which is heated quickly. In the summer, if the unit is moved suddenly from an air conditioned room or car to a hot or humid location. SHOULD CONDENSATION OCCUR: The unit may not operate properly if condensation occurs. Wait for 1 to 2 hours (to allow the internal parts to adjust to the surrounding temperature) before using the unit. Thank you for purchasing the SANYO CDP M303. The CDP M303 comes with headphones and an AC adapter. THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM, DESIGNED WITH BUILT IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE. EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO THE HUMAN EYE. THIS IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK UP LENS, IT IS COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS. LASER SAFETY SAFETY TIPS SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN product. The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. Do not apply oil or petroleum products or solvents to any part of this set. CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
Page 2
123 45 6 78910 11 1213 141516 17 17 17 17 17 1. "PROG" shows during programmed playing. 2. "SHUFF" shows during random playing. 3. "INTRO" shows during intro scan playing. 4. "MP3" shows when the disc being played is an MP3 disc. 5. "CD" shows when the disc being played is a CD. 6. The "HOLD" will be shown if the hold switch is set to "on" position (optional). 7. "REPT" shows during repeat playing. 8. "REPT 1" shows during single track repeat playing. 9. "REPT DIR" shows during single album tracks repeat playing (only for MP3 disc). 10. "REPT ALL" shows during the whole disc repeat playing. 11. The symbol " " shows when the unit is running on weak batteries. 12. The current album number during MP3 playing. 13. The number of the track being played. 14. The elapsing minute of the track being played. 15. The elapsing second of the track being played. 16. This symbol shows when the ESP (Electronic skip Protection) function is activated. 17. This is the status column. During MP3 playing, it also shows the playing information of the current track. 1. CD DOOR 2. BACKWARD SKIP/SEARCH BUTTON 3. ALBUM/10+ BUTTON 4. CD MODE BUTTON 5. CD FORWARD SKIP/SEARCH BUTTON 6. CD PLAY/PAUSE BUTTON 7. CD STOP BUTTON 8. EQ/PROGRAM BUTTON 9. VOLUME DOWN BUTTON10. LCD(Liquid Crystal Display) 11. VOLUME UP BUTTON 12. LINE OUT JACK 13. PHONES JACK 14. BATTERY COMPARTMENT 15. CD DOOR OPEN SWITCH 16. DC INPUT JACK 17. 18. BASS BOOST SWITCHHOLDSWITCH 1 23 45 67 89 1011 12 13 14 15 LOCATIONS OF CONTROLS SIGNS IN LCD DISPLAY WINDOW 04 03 16 17 18