Sansui RZ 6100 AV Service Manual

Page 2

FOR CONTINUED SAFETY THE FOLLOWING PRECAUTIONS SHOULD BE
FOLLOWED DURING SERVICING

1. MAKE SURE POWER CORD IS DISCONNECTED BEFORE REPLACING ANY
PARTS.
2. REPLACE WITH THE SAME TYPE, CRITICAL PARTS WITH ' MARK ON

THIS DIAGRAM.

3. THE FOLLOWING TEST MUST BE IMPLEMENTED AFTER EACH REPAIR
BEFORE RETURNING IT TO CUSTOMER.
USE AN OHM-METER TO MEASURE THE D.C. RESISTANCE FROM BOTH
A.C. CONDUCTORS TO ANY EXPOSED METALLIC PARTS SUCH AS A
SCREW HEAD, METAL INLAYS ETC. THE RESISTANCE MEASURED TO BE

10 MEGAoHMs MINIMUM.