Rotel RMZ 950 OM

This is the 30 pages manual for Rotel RMZ 950 OM.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.

Page: 1 / 30
Rotel RMZ 950 OM

Extracted text from Rotel RMZ 950 OM (Ocr-read)


Page 1

RDTE

MUlll-ROOM
COMPONENT

SYSTEM

Technical Overview and Installation Manual

Page 2

This symbol is to alert the
user of the presence of
dangerous voltages inside
the enclosure of the
RM2950. To reduce the risk
of electric shock do not
remove any parts of the
RM2950.

Read all the instructions before connecting or
operating the RM2950. Pay particular attention
to the safety information. Keep this manual so
you can refer to these safety instructions.

WARNING: There are no user serviceable parts
inside. Refer all servicing to qualified service
personnel.

WARNING: To reduce the risk of fire or electric
shock, do not expose the RM2950 to moisture
or water. Do not allow foreign obiects to get
into the enclosure. If the unit is exposed to
moisture, or a foreign object gets into the enclo-
sure, immediately disconnect the power cord
from the well. Take the unit to a qualified ser-
vice person for inspection and necessary re-
pairs.

Clean the RMZSSO only with a dry cloth or a
vacuum cleaner.

Place the RMZSSO on a fixed, level surface
strong enough to support its weight. Keep the
RMZSSO away from radiators. heat registers,
stoves, or any other appliance that produces
heat.

This symbol is to alert the
user of important operating
instructions in the owner's
information accompanying
the RM2950.

Keep the ventilation inlets on the top of the unit
unobstructed. If the RMZSSO is placed in an en«
closure, there must be sufficient ventilation of
the enclosure to allow proper cooling.

Connect the HMZSSO to the power outlet only
with the supplied 3-pin grounded power supply
cable or an exact equivalent. The cable should
be connected to a properly grounded 3-pin wall
outlet. Do not modify the supplied cable in any
way. Do not use extension cords.

Do not route the power cord where it will be
crushed, pinched, bent at severe angles. ex-
posed to heat, or damaged in any way. If the
cable shows any sign of wear or damage, imme-
diately stop using it and obtain a proper replace-
ment from a qualified service agency or from the
Hotel service department.

If the RM2950 shows signs of improper opera-
tion, or if it has been dropped or damaged in
any way, immediately disconnect the power
cord from the well. Take the RMZSSO to a quali-
fied service person for inspection and necessary
repairs.