Rotel RLC 900 OM

Page 2

RISK OF ELECTRIC SHOCK
DO NOT OPEN

l

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO
NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.

l

APPLICABLE FOR USA. CANADA 0R WHERE
APPROVED FOR THE USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH WIDE BLADE

OF PLUG TO WIDE SLOT. INSERT FULLY.

\

ATTENTION: POUR EVITER LES CHOCS ELECTRIOUES,
INTRODUlRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSOU AU FOND.

F

This symbol is to alert the user to the
presence of uninsuleted dangerous
voltages inside the product's enclosure
that may constitute a rislr of electric shock.

This symbol is to alert the user to important
operating and maintenance (service)
instructions in this manual and literature
accompanying the product.

l

WARNING:
There are no user serviceable parts inside. Refer all servicing to
qualified service personnel.

WARNING:

To reduce the risk of fire or electrical shock, do not expose the unit
to moisture or water. Do not allow foreign objects to get into the
enclosure. If the unit is exposed to moisture, or a foreign object
gets into the enclosure, immediately disconnect the power cord
from the well. Take the unit to a qualified service person for in-
spection and necessary repairer

Read all the instructions before connecting or operating the unit. Keep this
manual so you can refer to these salety instructions.

Heed all warnings and safety information in these instructions and on the
product itsell. Follow all operating instructions.

Clean the unit only with a dry cloth or a vacuum cleaner.

Keep the ventilation inlets on the unit unobstructed, For example, do not place
the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the unit is placed in a bookcase or cabinet, there must be sufficient
clearance around the unit and ventilation of the cabinet to allow proper cooling.

Keep the unit away from radiators, heat registers, stoves, or any other
appliance that produces heat.

The unit must be connected to a power supply only of the type
and voltage specified on the rear panel of the unit.

Connect the unit to the power outlet only with the supplied 2-pin polarized
power supply cable or an exact equivalent, Do not modify the supplied cable in
any way. Do not attempt to defeat grounding and/or polarization provisions. The
cable should be connected to a 2»pin polarized wall outlet, matching the wide
blade of the plug to the wide slot ol the receptacle. Do not use extension cords.

Do not route the power cord where It will be crushed, pinched, bent at severe
angles, exposed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where it exrts the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left
unused for a long period of time.

Immediately stop using the unit and have it inspected and/or serviced by a
qualified service agency if:

- The power supply cord or plug has been damaged.

- Objects have fallen, or liquid has been spilled, into the unit.
0 The unit has been exposed to rain.

- The unit shows Signs of improper operation

- The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong
enough to suppon its weight. Do not place the
unit on a moveable can that could tip over.