Pioneer pl 88 fs owners manual

Page 1

(xyafihglhsaucfibns
EhflfiEnungsankfinung

kakadtunpkfi
knnuflwfirxvlbso

English; Page 1
Deutsch; Seite 20

Thank you for buying this Pioneer product.

Please read through these operating instructions and then you
will know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.

These operating instructions are based on the model HE, and
they can be used for the HB, HP. KU, KC, S, SIG models.
The differences between the models are given below.

HE model;
For Europe (HE stamped on packing case): A 2-point (220
V/ 240 V) voltage selector switch is provided.

HB model:

For U.K. lHB stamped on packing case): A 2-point (220

V/240 Vl voltage selector switch is provided.

HP model:
For Australia (HP stamped on packing case); A 2-point
I220 V/240 V) voltage selector switch is provided.

KU and KC models:
For U.S.A. and Canada ('KU' or KC stamped on packing
case): power line voltage is 120 volts.

5 and 5/6 models:
For destinations excluding above (S or 8/6 stamped on
packing case): A 4~point (110V I120 Vl220 V/240 Vl
voltage selector switch is provided.

IMPORTANT NOTICE [For KU and KC modelsI

., The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.

Panel Facilities ..........
Operation before Use .
Record Play ............

CONTENTS

HOB-00272

STEREO TU RNTABLE
STEREO-PLATTENSPIELER

L-BBFS

LINE VOLTAGE SELECTOR SWITCH
[For HE, HB, HP, S and 8/6 models]

The line voltage selector switch is located on the rear panel of
this turntable. Before your turntable is shipped from the fac-
tory, the switch is set to the power requirements of the turn-
tables destination. Check that it is set properly before plugg»
ing the power cord into the outlet. If the voltage is not proper-
ly set or if you move to an area where the voltage requirements
differ, adjust the selectoror switch as follows:

- Provide yourself with a medium-sized screwdriver. Insert
the tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow.

REGLAGE DE TENSION SECTEUR ¢
LINE VOLTAGE SETTING

A022

.
c?

WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.

Maintenance
Specifications .. ..
Troubleshooting .......................................... 19

GD prom-Jaw

ENGUSH

DEUTSCH