Pioneer ctw 901 r owners manual

Page 1

(U) PIONEER Operating Instructions
The°""""a"""" Mode d emploi

-
(Mum-voltage models only)
(Modeles a tension multiple seulementl

STEREO DOUBLE CASSETTE DECK
DOUBLE PLATINE CASSETTE STEREO

O CT-WBOl R

WARNINGITO PREVENT FIRE 0R SHOCK HAZ- LINE VOLTAGE SELECTOR SWITCH
Arm. Do NOT EXPOSE THIS APPLIANCE T0 RAIN on
MOISTURE.

IMPORTANT NOTICE

[For U.S. and Canadian models]

The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war»
ranty card and keep it in a secure area. This is for your

security.
Mediumrsize
[For Canadian model] sc'er'we'
CAUTION :To PREVENT ELEcTRIc SHOCK Do
NOT USE THIS (POLARIZED) II-UG WITH AN EXTENSION Only multi-voltage models are provided with this switch. U.S..

CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED To PREVENT BLADE CanadIan. European, U.K.. and AustralIan models are not

EXPOSURE. provided with this switch.

Main voltages in Saudi Arabia are 1 27V and 220V only. Never
ATTENTIONiPOUR PREVENlR LES cuocs use this model with a 110v setting in Saudi Arabia.
1&5:ch53:33::ngléuklifiEiigi gggijzggfifgfi The line voltage selector switch is on the rear panel. Before
UNE AUTRE SORTIE DE COURANT, SAUF sr LEs LAM ES your model IS Shipped from the new? swmh '8 5e? t.°
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER the power requirements of the destInatIon. Check that It IS
AUCUNE PARTIE A DECOUVERT. set properly before plugging the power cord into the AC out-

let. If the voltage is not properly set or if you move to an area
where the voltage requirements differ, adjust the selector
switch as follows.

1. Disconnect the power cord.

2. Use a medium-size screwdriver.

3. Insert the screwdriver into the groove on the voltage selec-
tor, and adjust so that the tip of the arrow points to the
voltage value of your area.

Page 2

IMPORTANT 1

The lightning flash with arrowhead. within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be 0' Sumcicnt magnitude tn constitute
a risk of electric shock to persons.

CAUTION

RlSK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK. DO
NOT REMOVE COVER (ON BACK). N0 USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TD
QUALIFIED SERVICE PERSONNEL

The exclamation point within an equilateral triangle is
intended to alert the usertd the presence oI important
operating and maintsnnnce (servicing) instructions in
the literature accompanying the appliance.

IMPORTANT 2

it the apparatus is fitted with Ac mains power autletis).
see REAR PANEL FACILITIES tor convenient
connection of additional HisFi componenttsl. Make all
connections to the At: outletlsl and the signal terminals
first. Connect the plug to the wall socket last. make
sure that the power switch is art.

FOR USE IN THE UNITED
KINGDOM

The s in this mine lead are coloured in
accordance with the rollowlng code:

Blue: Neutral

Brow . Live
As the colours oi the wires in the mains lead or this
apparatus may not correspond with the coloured
marking identifying the terminals in your plug proceed
as lollows:

The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.

The wire which iscolouted orown must be connected
to the terminal which is marked with the letter L or
coloured red.

Do not connect either wire to the earth terminal or a
three pin plug.

Equipment sold in the u.K. is not supplied with - power
plug.

READ INSTRUCTIONS - All the safety and operating
instructions should be read before the appliance is
operated.

RETAIN INSTRUCTIONS , The opsrating instructions
should be retained for luture reference.

HEED WARNING -Al|warnings on the appliance and in
the operating instruclions should be adhered to.

FOLLOW INSTRUCTIONS - All operating and use in»
structions should be followed.

WATER AND MOISTURE s The appliance should not
be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub. in a wet bise-
rnant, or near a swimming pool, etc.

lOCATION - The appliance should he installed in a
stable location.

WALL OR CEILING MOUNTING - The appliance
should not be mounted to a wall or ceiling.

VENTILATION , The appliance should be situated so
that its location or position does not interfere with
its proper ventilation. For example. the appliance
should not be situated on a bed, sofa, rug, or similar
surhcethatmeyhlock the ventilation openings; or,
placed in a built-in installation, such as e bpakc-se
or ca at that may impede the flow or air through
the ventilation openings.

HEAT - Th! appliance Should ha situltad away from
heet sources such as radiators, heat registers,
stoves. or other appliances (includinu amplifiers}
that produce heat.

POWER SOURCES - The appliance should be con-
nected to a power supply only oi the type de-
scribed in the operating instructions or as marked
on the appliance.

POWEflrCORD PROTECTION - Power-supply cards
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit irom the appliance.

POLARIZATION , If your purchased product is pro
vided with a polarized power plug, please read the
tollowing instructions. This product is equipped
witha polarized alternating current line plug to plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a
satety texture. If you are unable to insert the plug
rully into the outlet, try reversing the plug. If the
plug should still iail to fit. contact yourelec anto
replace your obsolete outlet, Do not defeat the
sarety purpose at the polarized plug.

CLEANING - The appliance should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture waxy benzine, insecticides or
other volatile liquids since they may corruds the
cabinet.

SAFETY INSTRUCTIONS

POWER LINES- An outdoor antenna should be located
away from power lines.

Menus: PERIODS - The power cord or the appliance
should he unplugged item the outlet when lett un»
used for a long period or time.

OBJECT mo Llouu: ENTRY - Care should be taken
sothetelrjects do notfall and licuidsare not spilled
into the enclosure through openings.

DAMAGE REQUIRING SERVICE - The appliance

should be serviced by a Pioneer authorized service

center or qualified service personnel when:

The powerssupply cord or the plug has been dam-

aged.

Obiects have fallen. or liquid has been spilled into

the appliance.

The appliance has been exposed to rain.

The appliance does noteppearto operate normally

or exhibits a marked change in performance.

The appliance has been dropped or the enclosure

damaged.

SERVICING - The user should not attempt to service
the appliance beyond thatdesc ' din the operas
tinginstructions.Forallotnerservi ng,ccnractthe
nearest Pioneer authorized service center.

GROUND CLAMPS

OUTDOOR ANTENNA GROUNDING - I! an outside an-

tenna is connected to the antenna terminal,be sure
the antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1934. provides informa-
tion with respect to proper grounding at the mast
and supporting structure. grounding of the lead-in
wire to an antenna discharge unit. size M grounding
conductors, location or antenna discharge unit.
connection to grounding electrodes, and require-
ments tor the grounding electrode. See Fig. A.

CART - An appliance and cart combination should be
moved with care. Quick stops, excessive iorce, and
uneven surfaces may cause the appliance and can
combination to overturn.

NEC - NATIONAL ELECTRIC CODE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 310 -- 20)

GHOUNDING CONDUCTORS
INEC SECTION 310 - 21)

POWER SERVICE GROUNDING
ELECTRODE SYSTEM

FIG. A (NEC ART 250, PART HI

2
< RRE1053>
En