Panasonic sx kc600 user manual

Page 2

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. (for UNITED KINGDOM)

This appliance is supplied with a moulded three-pin
mains plug for your safety and convenience.

A 5 amp fuse is fitted in this plug.

Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5 amps
and that it is approved by ASTA or BSl to 851362.
Check for the ASTA mark @ or the BSI mark %?
on the body of the fuse.

If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.

If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.

A replacement fuse cover can be purchased from
your local Panasonic/Technics Dealer.

IF THE FlTTED MOULDED PLUG lS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED OF SAFE»
LY.

THERE IS A DANGER OF SEVERE ELECTRlCAL
SHOCK IF THE CUT-OFF PLUG IS lNSEFlTED
INTO ANY 13 AMP SOCKET.

If a new plug is to be fitted please observe the
wiring code as shown below.
if in any doubt please consult a qualified electrician.

IMPORTANT: -The wires in this mains lead
are coloured in accordance with
the following code:7

Blue: Neutral
Brown: Live

As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows.

The wire which is coloured BLUE must be con-
nected to the terminal in the plug which is
marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be
connected to the terminal in the plug which is
marked with the letter L or coloured FtED.

Under no circumstances should either of these
wires be connected to the earth terminal of the
three-pin plug, marked with the letter E or the
Earth Symbol 4-.

How to replace the fuse. Open the fuse compart-
ment with a screwdriver and replace the fuse and
fuse cover.