Nakamichi DELTA 10 S Owners Manual

Page 5

PAIRING WITH BLUETOOTH DEVICES

Your Bluetooth speaker can pair with most Bluetooth 2.0 and 2.1 devices. Pairing may vary by devices. Consult
your Bluetooth devices owners manual for pairing instructions.

1. Press 0 key to switch to Bluetooth mode.

2. Turn on Bluetooth on your device (e.g. Smartphone), Delta 10 will be shown on your devices
Bluetooth list. Please select.

3. Press and hold a key for 3 seconds until consecutive beep sound is played, the Bluetooth LED
will keep flashing RED and BLUE alternatively quickly waiting for your Bluetooth device to pair.

4. Connect your device to the BT Speaker with Bluetooth, your device menu will show Connected, the

Bluetooth LED will stay Blue when pairing is successful.

You can now play your music wirelessly with the BT Speaker.

6. IMPORTANT PLEASE NOTE: If you wish to connect a different device, please TURN speaker off and then
repeat steps (1-3) for new device.

5"

Please Note:

For mobile phones with Bluetooth 2.0 your device may request you enter a pass code during pairing,

please press 0000.

The Delta 10 can remember up to 8 Bluetooth devices, to clear the memory, press a key for 3 seconds
until you hear a Beep sound from your speaker, the Bluetooth LED will flash quickly. Then press the okey
twice, the Blue LED will stop. When the Blue LED starts flashing again the unit is in pairing mode. You

will need to run through the pairing setup again with your device (e.g. Smartphone).

TO TU RN YOUR BLUETOOTH SPEAKER TO STANDBY MODE

When the speaker is ON, press the once. The speaker will take around 3 seconds to shut down,
the LEDs will turn OFF and remember your Bluetooth device.

CONNECTING THE LATEST BLUETOOTH DEVICE

1. This is a quick method to connect your Speaker with the latest Paired Device.

2. Turn on your unit by pressing the okey, it will connect with the device automatically, the BT
LED will stay ON when the connection is successful. If the speaker cannot find the latest Device, it will
go to Waiting for Connection mode. Please check that your device (Smartphone) is visible to other
devices refer your device owners manual.

CONNECTING A PREVIOUSLY PAIRED BLUETOOTH DEVICE

1. If you want to connect another device instead of the current paired one, please make sure the
Bluetooth connection of the current device is turned off.

2. Disconnect your current playing device, the speaker will change to Waiting for Connection mode, the
BT LED will keep flashing slowly.

3. Turn ON your Bluetooth device (e.g. Smartphone) Bluetooth setting.

4. Select the Speaker from your devices Bluetooth list and push the @ key for 3 seconds to connect to
the speaker.

5. The Bluetooth LED will stay Blue when connection is successful. You can play your music wirelessly

with BT Speaker.

You can also connect your paired device under pairing mode.

7. Under Waiting for Connection mode, you can simply reconnect to your latest paired device byjust

pressing the @key once.

9