Moon lp 3 owners manual

Page 2

MOON LP3 Phono Preamplifier Important Safety Instructions (contd) The lightning flash with the arrowhead symb ol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of suffic ient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral tria ngle is intended to alert the user to the presence of important operating and main tenance (servicing) instructions in the literature accompanying the appliance. Marking by the CE symbol (shown left) indicates compliance of this device\ with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community Please read all instructions and precautions carefully and completely before operating your Simaudio MOON LP3 Phono Preamplifier. 1. ALWAYS disconnect your entire system from the AC mains before connecting or dis\ connecting any cables, or when cleaning any component. 2. The MOON LP3 must be terminated with a three-co nductor AC mains power cord which includes an earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used. Connect the MOON LP3 only to an AC source of the proper voltag e; Both the shipping box and rear panel serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void the warranty. 3. AC extension cords are NOT recommended for use with this product. 4. NEVER use flammable or combustible chemic als for cleaning audio components. 5. NEVER operate the MOON LP3 with any covers removed. There are no user-serviceable parts inside. An open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer all questions to authorized service personnel only. 6. NEVER wet the inside of the MOON LP3 with any liquid. If a liquid substance does enter your MOON LP3, immediately disconnect it from the AC mains and take it to your MOON dealer for a complete check-up. 7. NEVER spill or pour liquids directly onto the MOON LP3. 8. NEVER block air flow through ventilation slots or heatsinks. 9. NEVER bypass any fuse. 10. NEVER replace any fuse with a value or type other than those specified. 11. NEVER attempt to repair the MOON LP3. If a problem occurs contact your MOON dealer. 12. NEVER expose the MOON LP3 to extremely high or low temperatures. 13. NEVER operate the MOON LP3 in an explosive atmosphere. 14. ALWAYS keep electrical equipment out of reach of children. 15. ALWAYS unplug sensitive electronic equi pment during lightning storms. ________________________________________________________________________\ ____________