Lexicon ldd 1 owners manual

Page 1

Unpacking and Inspection Save all packing materials in case you ever need to ship the unit. Thoroughly inspect the unit and packing materials for signs of damage. Report any shipment damage to the carrier at once; report equipment malfunction to your dealer. Precautions Save these instructions for later use. Follow all instructions and warnings marked on the unit. Always use with the correct line voltage. Refer to the manufacturer's operating instructions for power requirements. Be advised that different operating voltages may require the use of a different line cord and/or attachment plug. Do not install the unit in an unventilated rack, or directly above heat producing equipment such as power amplifiers. Observe the maximum ambient operating temperature listed in the product specification. Slots and openings on the case are provided for ventilation; to ensure reliable operation and prevent it from overheating, these openings must not be blocked or covered. Never push objects of any kind through any of the ventilation slots. Never spill a liquid of any kind on the unit. This product is equipped with a 3-wire grounding type plug. This is a safety feature and should not be defeated. To prevent shock or fire hazard, do not expose the unit to rain or moisture, or operate it where it will be exposed to water. Do not attempt to operate the unit if it has been dropped, damaged, exposed to liquids, or if it exhibits a distinct change in performance indicating the need for service. This unit should only be opened by qualified service personnel. Removing covers will expose you to hazardous voltages.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN This triangle, which appears on your component, alerts you to the pres- ence of uninsulated, dangerous volt- age inside the enclosure... voltage that may be sufficient to constitute a risk of shock.This triangle, which appears on your component, alerts you to important operating and maintenance instruc- tions in this accompanying litera- ture. Acknowledgements The CP and DC Series are manufactured under license from Dolby Laboratories Licensing Corporation. Additionally licensed under one or more of the following patents: U.S. numbers 3,632,886, 3,746,792 and 3,959,590; Canadian numbers 1,004,603 and 1,037,877. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Copyright Ó1997 Lexicon, Inc. All Rights Reserved. Lexicon Part # 070-11659 Rev 1 Lexicon Inc. - 3 Oak Park - Bedford MA 01730-1441 Telephone 617-280-0300 - Fax 617-280-0490

Page 2