Krell kav 280 p owners manual

Page 1

K E3 E L L KAV-280p

Remote Control
Preamplifier

THE LEADEFI IN AUDIO ENGINEERING

Instructions for Use

Owners Reference

Page 2

KAV-280p

Remote Control Preamplifier

Instructions for Use
v 02.0

CONTACT
INFORMATION

WARNINGS

Krell Industries, Inc.

45 Connair Road

Orange, CT 06477-3650 USA

TEL 203-799-9954

FAX 203-891-2028

E-MAIL krell@kre|lonline.com
WEBSITE http://www.kre|lonline.com

(E

This product complies with the EMC directive (89/336/EEC) and the low-voltage
directive (73/23/EEC).

Do not place the preamplifier where it could be exposed to dripping or splashing.

The ventilation grids on the top and bottom of the KAV-280p must be unob-
structed at all times during operation. Do not place flammable material on top of
or beneath the component.

Do not remove or bypass the ground pin on the end of the AC cord. This may
cause RF] (radio frequency interference) to be induced into your playback sys-
tem.

When making connections to this or any other component, make sure all compo-
nents are off. Turn off all systems power before connecting the KAV-280p to any
other component. Make sure all cable terminations are of the highest quality, free
from frayed ends, short circuits, or cold solder joints.

When the line fuse needs to be replaced, use the spare fuse provided. Unplug
the component before replacing the fuse.

THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.

Please contact your authorized dealer, distributor, or Krell if you have any ques»
tions not addressed in this reference manual.

This product is manufactured In the United States at America. Krell® is a registered trademark ct Krell
Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents.
Krell Current ModemI and Theater ThroughputTM are trademarks of Krell Industries, Inc. All other trade
marks and trade names are registered to their respective companies.

© 2002 by Krell Industries, Inc. All rights reserved P/N 306429