Kenwood KA 6100 Owners Manual

Page 2

INTRODUCTION

The purpose of this manual is to acquaint
you with the operating features this unit. You will
notice that in every detail of planning, engineering,
styling, operating convenience, and adaptability,
we have sought to anticipate your needs and
desires.

We suggest that you read through this
manual carefully. Knowing how to set up the unit,
to the best advantage, will enhance your listening
pleasure right from the start. You will also
become aware of the ease with which you can
adjust the unit to meet your special requirements.

SERIAL NUMBER

Record your SERIAL NUMBER on the
spaces designated on the warranty card. You will
find the serial number on the back of the unit.

AFTER UNPACKING

After unpacking, we recommend you inspect
and examine the unit for any possible shipping
damage. If your unit is damaged or fails to
operate, notify your dealer immediately. If your
unit was shipped to you directly, notify the ship-
ping company without delay. Only the consignee
(the person or company receiving the unit) can file
a claim against the carrier for shipping damage.

We recommend you retain the original car-
ton and packing materials to prevent any damage
should you transport or ship your unit in the future.

INSTALLATION PRECAUTIONS

la) Avoid locations subject to direct sunlight.
(b) Avoid high or low temperature extremes.
(cl Keep the unit away from heat radiating source.

(d) Keep the unit at least 4 inches (about 10 cen-
timeters) away from the wall and other things
for ventilation.

WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.

2 KA-6100iKl

IMPORTANTI

1. Units shipped to USA and CANADA

are designed to operate on 120 Volts
AC only. _
Therefore the above units are not
equipped with an AC Voltage Selec-
tor Switch and the following descrip-
tion on such a switch should be dis-
regarded. '

2. Units shipped to all other countries
are equipped with an AC Voltage
Selector Switch on the rear panel.
The following description should be
carefully read.

AC VOLTAGE SELECTION

This unit operates on 110 - 120 volts or
220 - 240 volts AC. Before connecting the
power cord to your AC outlet, make sure that the
setting position of the AC Voltage Selector Switch
matches your AC voltage. If not, it must be
properly changed in accordance with the
instructions below.

Note:
Our warranty does not cover damage caused by excessive
AC voltage due to improper setting of the AC Voltage Selec-
tor Switch.

Stopper plate

«a-A-ea

AC! 10 Aczzo AC1 10 AC220
420v 07240v ~120v "~24ov

(ACIZOVNJ (ACZZOVNI (ACIZOVNI (ACZZOVNl
1. Remove screw and stopper plate.
2. Slide lever to opposite side.
3. Lock lever by attaching stopper
plate to opposite screw.

( ) European type.

AC Voltage Selector Switch