Kenwood C2 Service Manual
This is the 14 pages manual for Kenwood C2 Service Manual.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.
Extracted text from Kenwood C2 Service Manual (Ocr-read)
Page 2
DISASSEMBLY FOR REPAIR
. Remove the metallic cabinetl (D l.
. Remove 3 screws retaining the panel ass'y from the
4.
Note: Be careful not to let the pub drop before the rim of
5.
. Remove 4 screws retaining the pcb to the frame ( ® )
DISASSEMBLY FOR REPAIR
bottom side l (2) ) Remove 2 screws retaining the
chassis and the sub panel ( © ).
and 3 screws at the rear panel ( © ).
Now the pub can be freed from the chassis with the
front panel ass'y and the rear panel attached to the pub.
Lift the front panel ass'y side a little and gradually lift
the peb holding the front and the rear panel ( © ).
the chassis when lifting the pcb up.
Stand the pcb as shown in the figure so that components
can be replaced ( ® ).
)
A,
A-\