Heathkit ID 5001 1 Manual
This is the 39 pages manual for Heathkit ID 5001 1 Manual.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.
Extracted text from Heathkit ID 5001 1 Manual (Ocr-read)
Page 1
Heathkit® Manual for the
HUMIDITY SENSOR ACCESSORY
Model IDA-5001-1
595-3737-01
Please perform the following steps and assemble your
3-rlng binder before you build your kit. Do not unpack
your kit until you are instructed to do so.
] Locate the envelope marked Binder Hardware, and re-
move the hardware from it.
) Refer to Figure 1 and position the binder cover with the
large hole as shown.
J Locate the 3-ring assembly.
) Determine which side of the rings unhook. Then position
the ring assembly as shown and mount it to the cover with
the binder hardware: two 6-32 x 3/8 nylon screws, two
flat washers, and two 6-32 nuts. Do not overtighten the
hardware.
Figure 1 Copyright © 1988
Heath Company
All Flights Reserved
Printed in the United States oi America
Page 2
HUMIDITY
SENSOR ACCESSORY
Model IDA-5001-1
595-3737-01
Copyright © 1988
HEATH COMPANY Heath Company
BENTON HARBOR, All Flights Reserved
MICHIGAN 49022 Printed In the United States 01 Amsrlca