Harman kardon hk 715 service manual
This is the 37 pages manual for harman kardon hk 715 service manual.
Read or download the pdf for free. If you want to contribute, please upload pdfs to audioservicemanuals.wetransfer.com.
Extracted text from harman kardon hk 715 service manual (Ocr-read)
Page 2
ALIGNMENT PROCEDURES
STANDARD FREQUENCY ADJUSTMENT
INSTRUMENTS: Frequency Counter
(fr. /
ta r
STEP CONNECT OUTPUT METER T0 ADJUST ADJUST FOR - USA ADJUST FOR - HIROPE
1 Set FM switch to ON position.
2 Tuning Up or 90.1MH2 on 87.5MH2 on
Dawn Button Frequency Display Frequency Display
3 Frequency Counter to TPt TCGot 100.8MHz :1kHz reading 9e2MHz :kHz reading
and ground on frequency counter on frequency counter
4 Set AM switch to ON position.
5 Tuning Up or 1000kHz on 999m: on
Down Button Frequency Display Frequency Display
6 Frequency Counter to TP2 Confirm that frequency Confirm that frequency
and ground reading on frequency reading on frequency
counter is 1450M: counter is 1458 kHz
AM ALI G N MENT
INSTRUMENTS: AM RF Signal Generator modulated with 400 Hz at 30%.
DC Voltmeter
AC VTVM and Oscilloscope
NOTE: Set AM switch to ON position
Connect signal source to a loop placed to radiate signals into AM antenna loop stick (L201).
STEP SIGNAL SOURCE CONNECT DISPLAY SETHNG ADJJST ADNST FOR
USA EUROPE USA EUROPE
1 530m: 513kHz DC voltmeter to TP3 530kHz SlakHz L203 1V : SOrnV on
AM Mode AM Mod. and ground Dc voltmeter
2 l610f
3 455kHz 459kHz VTVM and 1810kHz 1620kHZ T201 . T203 Maxlmum output on VTVM
AM Mod. AM Mode oscilloscope to and at the same time
TP4 and ground clean wave on oscilloscope
4 600kHz 603m: Same as above 600kHz 603KH1 L201 Maximum output
AM Mod, AM Mod
5 1400kHz 1404kHz Same as above 1W2 1404kHz T0201 Same as above
AM Mod. AM Mod.
Repeat steps 4 and 5 for opflmum sensitivity