Denon DCM 500AE Service Manual

Page 2

SAFETYPRECAUHONS

LEAKAGECURRENTCHECK

cord is less than 460 kohms, the unit is defective.

LASERRANAHON

The following check should be performed for the continued protection of the customer and service technician.

Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power

Do not stare into beam or view directly with optical instruments, class 3A laser product.

©Heed the cautions!

Spots requiring particular attention when servicing, such as
the cabinet, parts, chassis, etc, have cautions indicated on
labels or seals. Be sure to heed these cautions and the cau-
tions indicated in the handling instructions.

©Caution concerning electric shock!

(1) An AC voltage is impressed on this set, so touching inter-
nal metal parts when the set is energized could cause
electric shock. Take care to avoid electric shock, by for ex-
ample using an isolating transformer and gloves when
servicing while the set is energized, unplugging the power
cord when replacing parts, etc.

(2)There are high voltage parts inside. Handle with extra care
when the set is energized.

© Caution concerning disassembly and assembly!

Though great care is taken when manufacturing parts from
sheet metal, there may in some rare cases be burrs on the
edges of parts which could cause injury if fingers are moved
across them. Use gloves to protect your hands.

©0n|y use designated parts!

The set's parts have specific safety properties (fire resis-
tance, voltage resistance, etc). For replacement parts, be
sure to use parts which have the same properties. In particu-
lar, for the important safety parts that are markedAon wiring
diagrams and parts lists, be sure to use the designated parts.

©Be sure to mount parts and arrange the
wires as they were originally!

For safety reasons, some parts use tape, tubes or other insu-
lating materials, and some parts are mounted away from the
surface of printed circuit boards. Care is also taken with the
positions of the wires inside and clamps are used to keep
wires away from heating and high voltage parts, so be sure to
set everything back as it was originally.

CAUTION Please heed the points listed below during servicing and inspection.

© Inspect for safety after servicing!

Check that all screws, parts and wires removed or discon-
nected for servicing have been put back in their original posi-
tions, inspect that no parts around the area that has been
serviced have been negatively affected, conduct an insulation
check on the external metal connectors and between the
blades of the power plug, and otherwise check that safety is
ensured.

(Insulation check procedure)

Unplug the power cord from the power outlet, disconnect the
antenna, plugs, etc., and turn the power switch on. Using a
500V insulation resistance tester, checkthat the insulation re-
sistance between the terminals of the power plug and the ex-
ternally exposed metal parts (antenna terminal, headphones
terminal, microphoneterminal, input terminal, etc.) is 1M0 or
greater. If it is less, the set must be inspected and repaired.

CAUTION Concerning important safety parts

Many of the electric and structural parts used in the set have
special safety properties. In most cases these properties are
difficult to distinguish by sight, and using replacement parts
with higher ratings (rated power and withstand voltage) does
not necessarily guarantee that safety performance will be pre-
served. Parts with safety properties are indicated as shown
below on the wiring diagrams and parts lists is this service
manual. Be sure to replace them with parts with the designat-
ed part number.

(1) Schematic diagrams Indicated by the A mark.
(2) Parts lists Indicated by the A mark.

Using parts other than the designated parts
could result in electric shock, fires or other
dangerous situations.

©fl§$§§$$v<fi$V!
u-exotselzy EEAZxEt?%>lIEfi/filt9b\rli=l=r
Bin; in $5.55, w-yaarzewwaenceesea
sauces-9: theoesssswaxftaaasam
7 assesses-v) «an»

©fl§ufif!

(1) :(Dty H; SéfifiEEpEDDDKnTL\§E?®FiEEfi
umaesammnatessazaosussoas
Tees-exams,sersyzoaaeesos

,aasame,sa7aaea ss

(mmauuaeeoesssussos,sseomau
u+fie>§<fi$vo

©fimtwwfir¢¥fioeiei

megraonmo WW! lix fiB$§£ifiB§rlZfifi§i§é LT
33) i??? W$fififilfififilltféofvéfilififlfiu i371)

X fiflfinafifiltfithfci iffiéibb? t E?!ltl§fi%§'%>i%
fibfi J i?®'§+fii§7§ Lz'CfEi L'CFi W $0fi§®
téalz$$§>2§fii L? < 77.33%

©fi$flfl®fiml

t / l~ ogralmmepmsee afiéiwfilfiifio f:
seasons-90 fin-Ciétfifiliuc'uli fiffiiflfvfizfi
(Dt E Ufili®§l§€u%f§lfi L? < fiifvo filtfiflrffilx E53:
El: ED'GfE/TELTnfb\éfiéi§§7&§fl$li%fif§i®
Ubéilfififi < EMJDO

©flfi®mfiwbmfimmsibbut

fiaauu!
est,e-7ee1-7eaosempseectu,7
Uyremoeeoczmnwnaessuss.same
meeasaeceaeym-ugoraaaeesea
unaltfifi Havel: 5 lztalasn-cusaoc :nBli/Zfi
77:83:30 i: LT< ream

DCM-390/290/2 7/500AE

E E fi-ExvéfifiKMwathBfififlvi?e

©fi-Exfiufiéfifié!

ff-EZUDEMLCHXUSr'll/Tzbu EBfi'm Efififiabfiafi
U lztofvéb 35737581 Ltllilfifiwlfifléégfbifi
"C Lioltt Z 6757EID75E8éfilfi Ls flfiflfilfififi¥fifl
tx E5J§75§®3~30fi50tfif§¥1"/7833E7EE57JKEX 22
éfibfilfiihfbfia E t 5&3? L? < 77:? W

(ifélféail y 7 (DEE)

EUR: vtv htBEfilfi757Efliifl 7V?7"\°75775;
EEfl LA EEJEZKVTEAflEéo 500V fifitfififirifii
LVC Eifi75§®ffl75fl®ffii¥tflfiflgflfi$lfififl [77
7"1fifi3a /\/ Fzlxvflnfln¥?47flrfi¥\ Ahflfi¥7381 t0)
Psi-6 tfifififilfibl M0 ui'éfiéitc UDtlEl-XFID
t if lit J l~ @fifitléiibdéE-G?o

E E fiéifigfiflsuovr

infantile L'CL\%>%< (DEfiEBEm Bidfilfififlfiuifié
is fiftlltzfiliifio (Di-é: Z (Dfililili tAIEOJt§éc
flifi'cliirIJ/tlbe l: < < \ its t 035.523: U smile (is
@271 ME) afiotsoaera bfefiéfibftfifién
7;: his, ER!) id/uo iéiwfifiéfiotfiflfinl; :0)
fl-EXVZJTIl/wfiafam Emilio-€033: 5 lain-1 L
(gisomzflaesn-wesrassosbeware
v o

(1) teralwAv-wsac-cuaso

(meaamAv-acsaczvsa

Eiéflfififléfitfité$®€f§fii bf: EEll:
lit $3 Mi; EUDEQEE Liéféthbfi U
as:

Page 11

DCM-390/290/27/500AE l

532%? 5:)" Symbol i/O Description
70 IOVDD2 - - l/O digital power supply.
Digital 71 DOUT O 1, 0 Digital Out output.
0 : 3-3_V 72 TEST I Test pin. Normally GND.
internal -
2.5V 73 TES1 l Test pin. Normally GND.
74 IOVssZ - - l/O digital GND.
- 75 NC -- -
76 XVss - - Master clock GND.
Xtal 77 XTAO 0 Crystal oscillation circuit output.
2-5V 78 XTAI I Crystal oscillation circuit input.
79 XVDD - ~ Master clock power supply.
80 AVDD1 - - Analog power supply.
Lch 81 AOUTl O Lch analog output.
3-3V 82 VREFL O Lch reference voltage.
83 AVssl - - Analog GND.
84 AVss2 -~ - Analog GND.
Rch 85 VREFR O Rch reference voltage.
3-3V 86 AOUTZ o Rch analog output.
87 AVooZ - ~ Analog power supply.
- 88 NC -~ -
89 lOVooO - - [/0 digital power supply.
90 RMUT O 1. O Rch "0" detection flag.
91 LMUT O 1 Lch "0" detection flag.
92 NC - -
Crystal selection input.
93 XTSL l Low when the crystal is 16.9344MH2;
high when the crystal is 33.8688MH2.
94 lOVssO -- - l/O digital GND.
Digital 95 XTACN I giggiiciilratcigguxhcgnmhgh, oscillation stop when low.
[fig-r233: 96 8030 O 1' 0 itsbggieTfigig-Zfitgflg PCM peak and level data output.
97 SQCK I 5080 readout clock input.
98 8880 O 1, 0 Subcode P to W seriat output.
99 EXCK I 8880 readout clock input.
100 XRST l System reset. Reset when low.
101 SYSM l Mute input. Muted when high.
102 D ATA | Serial data input from CPU.
103 Vss - - internal digital GND.
104 XLAT | Latch input from CPU. The serial data is latched at the falling edge.

ll

Page 39

NOTE FOR SCHEMATIC DIAGRAM

WARNING:

Parts marked with this symbol A have critical characteristics.

Use ONLY replacement parts recommended by the manufactur-

er.

CAUTION:

Before returning the unit to the customer, make sure you make
either (1) a leakage current check or (2) a line to chassis resis-
tance check. If the leakage current exceeds 0.5 milliamps, or if
the resistance from chassis to either side of the power cord is
less than 460 kohms, the unit is defective.

WARNING:

DO NOT return the unit to the customer until the problem is lo-
cated and corrected.

NOTICE:

ALL RESISTANCE VALUES IN OHM. k=1,000 OHM
M=1,000,000 OHM

ALL CAPACITANCE VALUES IN MICRO FARAD.
P=MICRO-M|CRO I=ARAD

EACH VOLTAGE AND CURRENT ARE MEASURED AT
NO SIGNAL INPUT CONDITION.

CIRCUIT AND PARTS ARE SUBJECT TO CHANGE
WITHOUT PRIOR NOTICE.

39

I DCM-390/290/27/500AE

fiflfilfillzauc

AEITOEIKEIfiéEAETaTarcwzagagmw.
Tito (filfié fili%§lfifi®fifl$&l§fii L? < ream.

ii)
(I) I ifiiifitfilfili O. k ii kO: Mli MO EEO:
) T Eta-Ezy?>fi-0>1Eu DIR p lat pF Erma:
(3) EEISOPEIIImEEUMEEfim
)

ZOEBfiEIiEZIEEBfiIF?O EflE§®7flvb£E?é
Z bifa U i?®'€57${< filth»,

E.
El
E.
El