Bang Olufsen Beomaster 3500 Owners Manual 2

Page 2

CAUTION: Use of any controls, ad-

justments or procedures other than
those specified herein may result in
hazardous radiation exposure

CLASS 1
LASER PRODUCT

The black and yellow label on the
compact disc player serves as a
warning that the apparatus contains
a laser system and is classified as
a class 1 laser product. In case of
any trouble with the compact disc
player, please contact your Bang &
Olufsen dealer. The apparatus must
be opened by qualified servicemen
only.

Page 26

24

Recording

if you want to use the Dolby B
noise reduction system, set the
DOLBY NR switch to ON.

1. Press @once to switch to
recording pause mode.

The cues REC and STOP light
up.

2. Start playing the source you
want to record from, eg. the
Beogram 3500.

3. Adjust the recording level using
the REC LEVEL slider.

4. Press [ESE at second time to start
recording.

The STOP cue disappears leav-
ing just the REC Cue lighting up.

5, Press ES once to stop record-
ing,
The STOP cue lights up again,
and the REC cue flashes briefly.
The tape recorder will insert a
blank of 4 seconds on the tape
before stopping.

6. Press @jj again to leave the
recording mode.

If you do not want the 4 second

pause on your tape, press @193
twice in rapid succession.

Subject to copyright law,

Using the auto reverse function

if you wish to change a recording
which is already in progress, press
@i. The tape will be rewound to
the spot where IE was last
pressed, and you can now resume
recording, or you can press STQEJ
to leave the recording mode.

if you are recording from the
Beogram CD 3500 or the Beogram
3500, recording stops automatically
when the compact disc or record is
linished. Likewise, if the tape runs
out during recording, the Beogram
CD 3500 or the Beogram 3500
stops automatically,

The Beocord 3500 features an
automatic tape reverse function,
which means that you do not have
to turn the tape manually. The tape
recorder automatically reverses the
tape at the end of side 1 and con-
tinues playback or recording on
side 2. The side of the cassette

which is facing you when loaded in
the cassette compartment is
regarded as side 1.

You can out the automatic tape
reverse function in or out as you
please. Set the AUTO REV switch to
ON to out in the function, or set it
to OFF to cut it out.

AmD Hey

Page 28

26

THE BEOGRAM CD 3500

This section explains how to ope-
rate the Beogram CD 3500. Before
you start using the compact disc

player, make sure you have set it up
according to the instructions in the
section Setting up.

Loading a compact disc

The disc compartment is under the
hinged lld.To gain access to the
disc compartment, press {EELS on
the operation panel. Place the com-
pact disc in the compartment with
the printed side facing you.

The lid closes automaticaiiy when
playing is started; When the CD-
player is switched to stand-by, the
lid also closes automatically.

Playing a compact disc

Press ELEM) start playing a 0mm
pact disc. The (ID-player registers
all the tracks on the compact disc
as indicated by the display on the
operation panel. Track numbers
above 14 are indicated by +.

As soon as all tracks are regis-
tered, playing starts at track 1.

Playing continues until the disc
runs out, or until you press [Etc
stop playing. The CD-player pauses
until you press @Eflagaln, You
can also stop playback by pressing
E to switch to stand-by.

Page 32

30

Pausrng

Press or .to lift the tonearm if the record player is left in pause
off the record. The tonearm rises mode for more than 8 minutes. it
and remains in this position while will automatically switch to stand-
the turntable continues rotating. by.

Press PLAY when you want to
resume playing,

Stepping through a record

You can move the ionearm to any During this procedure a tiny beam
position on a record and start play- of light illuminates the record to
ing from there, Use -to move the help you find the desired spot.
tonearm towards the centre of the

record or use -to move the

tonearm to the edge of the record.

Keep your finger on or E] until

you reach the desired spot. Then

release the button and press [E

to start piaying,