Akai am u110 user manual

Page 2

Operator 3 Manual

WARNING
POWER REQUIREMENTS

Power requirements for electrical equipment differ
from area to area.

Please ensure that your machine meets the power
requirements in your area.

If in doubt, consult a qualified electrician.

120V, 60 Hz for USA- and,__Canada

220V, 50 Hz for Europe except UK

240V, 50 Hz for UK and Australia
110-120V/220V/240V, 50/60 Hz internally switch-
able for other countries.

VOLTAGE CONVERSION . ,

Do not attempt this conversion yoursélf.

Models for Canada, USA, Europe, UK and Australia

are not equipped with this facility.

Each machine is preset at the factory according to

destination, but some machines can be set to 110-

120V, 220V or 240V as required. If your machine's

voltage can be converted, refer the following voltage

conversion to a qualified Service Repair Shop or pro-

fessional service personnel.

1. Disconnect the power cord.

2. Loosen the holding screws and remove the top
paneL

3. Remove the Line Voltage wire and fit onto proper
pins, explicitly following the printed instructions.

$:
A:

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER IOR BACK).

NO USE R-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

a risk of electric shock to persons.

pliance.

PRECAUTIONS

1.
2.

(DmVCD

10.

11.
12.

Use only household AC power sources.

Never use DC power sources.

Touching the plug with wet hands risks dangerous elec-
tric shocks.

Always pull out by the plug and never the cord.

. Make sure the power consumption of each audio com-

ponent does not exceed wattage specified on the rear
panel. Only connect other audio components.

. Only let a qualified professional repair or reassemble

the equipment. An unauthorized person might touch
the internal parts and receive a seriouselectric shock.

. Never allow a child to put anything, especially metal

into this equipment. A serious shock or malfunction
may occur.

. If water is spilled on this equipment, disconnect and

call your dealer.

. Make sure the equipment is well ventilated and away

from direct sunlight.

. Keep away from heat (stoves, etc.) to avoid damage to

the external surface and internal circuits.

. Avoid spray-type insecticides which will damage the

equipment and may ignite suddenly.

To avoid damaging the finish never use alcohol, paint
thinner or other similar chemicals.

Always place the equipment on a flat and solid surface.
Please read this manual in its entirety and keep it
handy for further reference.

The lightning flash with arrowhead symbol super-
imposed across a graphical representation of a per-
son. within an equilateral triangle, is intended to
alert the user of the presence of uninsulated "dan-
gerous voltage". within the product's encloure ;
that may be of sufficient magnitude to constitute

The exclamation point within an equilateral trian-
gle is intended to alert the user of the presence of
important operating and maintenance ( servicing I
instructions in the literature accompanying the ap-