Acurus 100 x 3 owners manual

Page 2

I lease read this manual. Upon completion you will understand the set-up
and operation of your lOOX3 Three Channel Power Amplifier.

I. Although all Acurus components
are burnt-in prior to delivery, it has
been our experience that the ampli-
fiers continue to improve during the
first 250 hours of use.

2. Although all Acurus amplifiers
contain comprehensive protection
circuitry, they still may be damaged
due to misuse. Therefore please use
the following basic safety precautions:

A] Allow adequate ventilation on all
sides at tho Acurus amplifiers. Never
place directly on carpeted tloor.

B) NEVER attach or remove speaker
cables or input cables with the
amplifier on.

3. Remove power cord from wall
outlet when changing fuses.

4. Do not use an extension cord »
connect the amplifier directly to your
AC. wall outlet. The Acurus is capable
of del'n/ering tremendous power to
your speakers, but not if its ability to
receive A.C. current is constricted in
any ww. If you must use an extension
cord 14 gauge wiring is minimum.

5. Be very careful with the placement
of all your systems wiring. Many times
placement of wiring will alter the
amount of background noise or hum
that is audible.

CONNECTIONS

INPUT-Connect your preamplifiers
or processor's line level outputs to the
appropriate input jack on the rear
panel. Before inserting or removing
any connectors be certain both the
preamp and power amp are OFF.

OUTPUT-Connect the amplifier
outputs to the appropriate inputs on
your speakers.

SPECIFICATIONS

CICUI'US

Rated Power

100 watts per channel continuous, iOOXS

three channels driven into 8 OHMS

20 Hz to 20,000 Hz at no more than Three Chqnhgl power
0.06% THD amplifier

125 watts per channel continuous. ,

three channels driven into 4 OHMS , owner is

20 Hz to 20,000 Hz information

Input Impedance

20K ohms

Input Sensitivity

1.1 volts for Mt output

Signal to Noise Ratio:
"MB A Weighted

For any additional information on
your Acurus IOOX3 Power Amplifier,
please call Mondial Designs Ltd.

at 914-693-8008.

Acurus Audio is a division of
Mondial Designs Ltd.

Caution: To prevent electric shock.
do not remove cover, no user-
serviceable parts inside.

Refer servicing to qualified personnel.

Warning: To prevent fire or shock haz-
ard, do not expose this appliance to
rain or moisture.